电子机架
可扩展至六个传感器电源通道的模块化系统
通道间电隔离
标准传感器状态读取接口
为有源负载模块提供电源
19英寸机架安装设备

MCTS II 前面板

一般数据
工作温度:
工作湿度:
保修期: -10 … 60 ⁰C
20 … 90 % RH, 无冷凝
36 个月

MCTS II 后面板

电气数据
供电电压:
输出电压:
最大功耗:
100-240 VAC, 50/60 Hz, 6 A 慢熔保险
15 VDC, 最大 3.4 A / -15 VDC, 最大 2.0 A
最大功耗取决于安装的通道数、连接的传感器数量以及每个传感器的电流消耗。使用 IN 2000-S 类型传感器在 2000 Arms 初级电流下，六通道 MCTS 的最大功耗约为 175 W。

多通道分析仪
MCTS Racks  
MCTS2/1CH Basic unit with one internal power supply including 19” mounting brackets, power cord and manual 
MCTS2/2CH Basic unit with two internal power supplies including 19” mounting brackets, power cord and manual 
MCTS2/3CH Basic unit with three internal power supplies including 19” mounting brackets, power cord and manual 
MCTS2/4CH Basic unit with four internal power supplies including 19” mounting brackets, power cord and manual 
MCTS2/5CH Basic unit with five internal power supplies including 19” mounting brackets, power cord and manual 
MCTS2/6CH Basic unit with six internal power supplies including 19” mounting brackets, power cord and manual 
MCTS2/BU Basic unit without internal power supply including 19” mounting brackets, power cord and manual 
MCTS/PS Internal power Supply